How do I reset my sky Viper drone?

How do I reset my sky Viper drone?

To reset to the default SSID and Password, turn on the TX, connect a battery to the Sky Viper, immediately turn the Sky Viper over to rest on its back and hold down both the PHOTO and VIDEO button simultaneously for a few seconds. Disconnect the battery from the Sky Viper and return it to an upright position.

How do I update Sky Viper firmware?

Firmware Upgrade To MANUALLY load new firmware go to http://192.168.99.1/firmware.html. MANUAL firmware updates will require you to have the latest firmware files loaded onto your device that is connecting to the Sky Viper via WiFi. With the drone powered on you will see the current firmware version of each firmware.

How do you calibrate a Sky Viper?

To calibrate, place the Sky Viper on a smooth, level surface with the power on and pressing the Start Simple Accelerometer Calibration button. The calibration will take just a few seconds. This type of calibration is good for most users.

How do I sync my sky Viper drone to my controller?

Hold down the F-trim, B-trim, and power button for 5 seconds. The controller will beep once and then begin beeping continuously to indicate that it is searching for a drone. Turn the controller and drone off and back on again to see if they pair. Give them about 30 seconds.

How do you reset a drone battery?

To reset it, you need to have the DJI charger on hand. Press the ON button two times and ignore any of the lights that may flicker. Do not press any other button but let the battery rest for another 5 minutes and plug in the charger but don’t press any button this time around.

What is the password for Sky Viper drone?

When prompted by the app, or if wanting to connect to the WEB AP interface (Advanced options), connect your device to the Sky Viper via WiFi. The WiFi SSID will be SKYVIPERGPS_xxxxxx where xxxxxx is the serial number of the drone. The default password will be “vipergps” (do not use quotes when entering password).

How do I reset my sky Viper drone Password?

To reset to the default SSID and Password, turn on the TX, connect a battery to the Sky Viper, immediately turn the Sky Viper over to rest on its back and hold down both the PHOTO and VIDEO button simultaneously for a few seconds. Disconnect the battery from the Sky Viper and return it to an upright position.

How do you reset the Holy Stone drone?

You can reset gyro by pulling down and left on both sticks at once. Hold until quad stops flashing. release sticks. quad should be reset.

Why is my drone battery not charging?

I found that there are two main reasons that might be causing this connection issue. Your drone might not be charging because of: A faulty or broken charger. A damaged battery that is caused by age, damage or poor battery maintenance.

Why is my sky Viper not flying?

Why is my sky Viper not flying? Make sure the drone is on a level surface (and NOT moving). If that still doesn’t work, make sure the drone’s battery is fully charged and that you have fresh AAA batteries in the controller. Try resetting your drone’s WiFi password.

Why isn’t my drone Wi-Fi working?

If your drone’s WIFI does not connect to your mobile phone, try resetting your drones WIFI. Do this on the DJI by holding down the power button for 9 seconds until you hear three beeps. The WIFI should then reset, then the drone’s two front lights will turn green. Now try to reconnect with your phone again.

Why wont my iphone find my Wi-Fi?

Still can’t connect? Reset your Network Settings. Tap Settings > General > Reset > Reset Network Settings. This also resets Wi-Fi networks and passwords, cellular settings and VPN and APN settings that you’ve used before.

Why can’t I connect to my sky Viper drone?

Make sure the drone is on a level surface (and NOT moving). If that still doesn’t work, make sure the drone’s battery is fully charged and that you have fresh AAA batteries in the controller. Try resetting your drone’s WiFi password.

What app do you need for a Sky Viper drone?

Capture Amazing Aerial Pictures & Videos and perfect your piloting skills with the new and improved Sky Viper Video Viewer 2.0 app! Configure your drone’s flight profiles with a selection of flight modes and speeds.

How far can a sky Viper drone fly?

HOW FAR AWAY CAN THE SKY VIPER VIDEO DRONE FLY? Your Sky Viper HD Video Drone can fly up to 350ft away. WHAT KIND OF BATTERIES ARE IN THIS TOY? The drone comes with a rechargeable lithium polymer battery and the remote takes 4 AAA batteries.

Leave a Comment