- 1 Why can’t I find my drones WIFI?
- 2 How do I enable LPT ports in Windows 10?
- 3 How do I connect my Tinyhawk?
- 4 What do you do if you lose your drone connection?
- 5 How do drones work with WIFI?
- 6 Does BLHeli work with Betaflight?
- 7 How do I save a command line as an Inav?
- 8 Why is my Ethernet not working on my PC?
- 9 Is Ethernet faster than Wi-Fi?
- 10 What is Gigabit LAN port?
- 11 Are all USB 3.0 ports Blue?
- 12 How do I know USB 3.0 port?
- 13 How do I know if my LPT port is working?
- 14 What is Ports COM & LPT?
- 15 How do I charge my Emax TinyHawk controller?
Why can’t I find my drones WIFI?
If your drone’s WIFI does not connect to your mobile phone, try resetting your drones WIFI. Do this on the DJI by holding down the power button for 9 seconds until you hear three beeps. The WIFI should then reset, then the drone’s two front lights will turn green. Now try to reconnect with your phone again.
How do I enable LPT ports in Windows 10?
Once you see “Device Manager”, click on the icon. With the “Device Manager” open, look for “Ports (COM & LPT)” in the list of different device types. Right click on “ECP Printer Port (LPT1)” and choose “Properties”. Navigate to the “Port Settings” tab and check the box to “Enable legacy Plug and Play detection”.
How do I connect my Tinyhawk?
Put tinyhawk into binding mode by pressing and holding the bind button while powering on tinyhawk. A green light will power on tinyhawk flight controller indicating in bind mode.
What do you do if you lose your drone connection?
So, what do you do when your drone loses its signal? You can get it to fly back home through the RTH button, look for it manually, check the last known coordinates, or check the drone’s telemetry information on your controller.
How do drones work with WIFI?
This works by creating a wifi spot between the drone and your mobile device, which then allows them to talk to each other while you pilot the vehicle using an interface with a joystick-like design. Once paired, your mobile device controls the drone’s flight by tilting in the direction you want to go.
Does BLHeli work with Betaflight?
In the BLHeliSuite32 configurator, click “Select BLHeli_32 interface” in the top menu, and select the option “BLHeli32 Bootloader (Betaflight/Cleanflight)“. At the bottom left of the program, choose the COM port of your flight controller in “Port“, leave Baud Rate at default (115200), and click “Connect“.
To save your settings type in ‘save’, saving will reboot the flight controller. To exit the CLI without saving power off the flight controller or type in ‘exit’. To see a list of other commands type in ‘help’ and press return. To dump your configuration (including the current profile), use the ‘dump’ or ‘diff’ command.
Why is my Ethernet not working on my PC?
Plug the Ethernet Cable into a Different Port If it’s been a minute and it still isn’t working, try plugging the cable into another port on the router. If this works, it means your router is faulty and it might be time for you to replace it. If that still doesn’t work, you can try swapping your ethernet cables.
Is Ethernet faster than Wi-Fi?
Ethernet is typically faster than a Wi-Fi connection, and it offers other advantages as well. A hardwired Ethernet cable connection is more secure and stable than Wi-Fi. You can test your computer’s speeds on Wi-Fi versus an Ethernet connection easily.
What is Gigabit LAN port?
Gigabit Ethernet switches are a type of network switch that supports Gigabit Ethernet speeds (1 Gbps) per connected device on a local area network (LAN). These switches typically come with four to eight ports for consumer use, while enterprise switches can handle many more connections.
Are all USB 3.0 ports Blue?
First, check the physical ports on your computer – USB 3.0 ports are sometimes (but not always) blue in color so if any of your USB ports are blue then your computer is equipped with USB 3.0. You can also check the logo above the port for the USB 3.0 SuperSpeed logo (pictured below).
How do I know USB 3.0 port?
Look at the physical ports on your computer. A USB 3.0 port will be marked either by a blue color on the port itself, or by markings next to the port; either “SS” (Super Speed) or “3.0”.
How do I know if my LPT port is working?
Click the Hardware tab, and then click Device Manager. Click to expand Ports, right-click Printer Port (LPT1), and then click Properties. If have more than one printer port installed on your computer, click LPT2 or LPT3. Click the Port Settings tab, click Enable legacy Plug and Play detection, and then click OK.
What is Ports COM & LPT?
COM ports can be used to connect peripheral devices and LPT port are specifically used for connecting printers. There settings in the BIOS and Windows depend up on the system manufactures. Hence, I would suggest you to contact your corresponding system manufacturer to check for the exact settings.
How do I charge my Emax TinyHawk controller?
The radio can be charged with a micro usb cable attached right below the speaker and power button. Power on and off by holding the power button for 2 seconds. The center light will turn green when on. The radio comes already bound to tinyhawk in the ready to fly kit.